• Peyman

  • Associate Professor
  • Manufacturing Engineering
Email:   
WebSite: https://faculty.uut.ac.ir/peyman_mashhadi_keshtiban

Short Bioghraphy

          

Peyman Mashhadi Keshtiban received BSc and MSc in manufacturing engineering from Amir Kabir University of Technology in 2005 and 2007, respectively, and during this period he carried out several industrial projects in the field of manufacturing engineering, especially mold making. He also received Ph.D. in manufacturing engineering from University of Tabriz in 2016. He is currently an Assistant Professor of Manufacturing engineering at the Urmia University of Technology, Iran. His current research interest includes Manufacturing Methods, Metals Forming and Materials Science.
         
    

Research and Education Resume

[رزومه فارسی]

Academic Education/Training (3)

Journal Articles (28)

Conference Papers/Abstracts/Posters (25)

Thesis Supervised (9)

Courses Taught (6)

Professional Skills (1)
   
  • Name and Family
  • Peyman
  • Degree
  • Mashhadi Keshtiban
  • Academic Degree
  • Associate Professor
  • Department
  • Manufacturing Engineering
  • E-mail:
  • m.keshtiban@mee.uut.ac.ir
 
        Short Bioghraphy

Peyman Mashhadi Keshtiban received BSc and MSc in manufacturing engineering from Amir Kabir University of Technology in 2005 and 2007, respectively, and during this period he carried out several industrial projects in the field of manufacturing engineering, especially mold making. He also received Ph.D. in manufacturing engineering from University of Tabriz in 2016. He is currently an Assistant Professor of Manufacturing engineering at the Urmia University of Technology, Iran. His current research interest includes Manufacturing Methods, Metals Forming and Materials Science.

 
 
         
     Research and Education Resume

Academic Education/Training (3)


1-Ph.D. Mechanical Engineering, Manufacturing & Production, University of Tabriz, Tabriz, Iran .

2-M.Sc. Mechanical Engineering, Manufacturing & Production, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran .

3-B.Sc. Mechanical Engineering, Manufacturing & Production, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran.

Journal Articles (28)


1- Investigation of mode-I fracture behavior by essential work of fracture during the single-point incremental forming process,Engineering Failure Analysis.

2- Constitutive analysis and hot deformation behavior of homogenized Al-3Mg alloy, JOM.

3- Fracture behavior of the forged aluminum 7075-T6 alloy under mixed-mode loading conditions, Engineering Failure Analysis .

4- Enhancing risk assessment of manufacturing production process integrating failure modes and sequential fuzzy cognitive map, Quality Engineering .

5- Numerical Simulation of Hot Forging Process of KIA Car Brake’s Output Shaft, International Journal of Advanced Design & Manufacturing Technology, accepted. .

6- “Optimization of 3D printing process parameters to minimize surface roughness with hybrid artificial neural network model and particle swarm algorithm”, Progress in Additive Manufacturing, 2021. " .

7- “Investigation on the anisotropy behavior of copper strips processed by a combination of FSP and ECAP”, Part L: Journal of Materials: Design and Applications, 2021. " .

8- “Practical Study and Finite Element Simulation of Production Process of the Bush of Gearbox of Mercedes-Benz 10-Wheel Truck by Closed Die Forging”, Journal of Computational Applied Mechanics, 2021. " .

9- “An Investigation of the Effective Factors in the Shape Rolling Process of a Compressor Blade”, Iranian Journal of Materials Forming, 2020. " .

10- “Microstructural Evolutions During the ECMAP Process Using the Die with Optimum Geometrical Parameters”, Metallography, Microstructure, and Analysis, 2020. " .

11- “An investigation of tensile strength of Ti6Al4V titanium screw inside femur bone using finite element and experimental tests”, Journal of Computational Applied Mechanics, 2020. " .

12- “Optimal Process Parameters in ECMAP of Al-3% Mg Alloy Strips”, International Journal of Advanced Design & Manufacturing Technology, 2020. " .

13- “Investigation of the effective parameters in severe plastic deformation of strip type samples”, Tabriz Mechanical Engineering, 2019. .

14- "A novel method for preform die design in forging process of an airfoil blade based on Lagrange interpolation and meta heuristic algorithm", The International Journal of Advanced Manufacturing Technology 102(6), DOI: 10.1007/s00170-019-03512-9..

15- “Performance evaluation of vegetable base oils relative to mineral base oils in the lubrication of cold forming processes of 2024 alumi”, Part J: Journal of Engineering Tribology, accepted. .

16- “Lubrication efficiency of vegetable oil nano-lubricants and solid powder lubricants”, Part L: J Materials: Design and Applications, 2018..

17- "Die and process parameters effects on ECAP process of sheet type samples", Metallography, Microstructure, and Analysis 2017..

18- "Routes Investigation in Equal Channel Multi-angular Pressing Process of UFG Al−3% Mg Alloy Strips", Transactions of the Indian Institute of Metals 2017..

19- "Effect of the Nano Particle Solution on the Coulomb Friction Behavior of Aluminum Alloy Forging Process using the Taguchi Method", Iranian Journal of Surface Science and Engineering 2017..

20- “Investigation of CuO and AL2O3 Nano-lubricants effect on the surface roughness in the forging process of aluminum alloy”, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 2017..

21- “Experimental Study of Al₂O₃ and SiC Nano Particles on Tensile Strength of Al1100 Sheet Produced by Accumulative Press Bonding Process”, International Journal of Industrial and Manufacturing Engineering Vol. 3, No. 10, 2016..

22- “ Friction study in Equal Channel Multi Angular Pressing: Load Curve and Ring Compression tests”, Transactions of the Indian Institute of Metals, Vol. 69, No. 9, pp. 1793–1800, 2016..

23- “Optimization of geometrical parameters of equal channel multi angular pressing process”, Modares Mechanical Engineering, Vol. 16, No. 2, pp. 275-282, 2016..

24- “Optimization of ECMAP Parameters in the Production of Ultra-fine Grained Al1050 Strips Using Grey Relational Analysis”, Journal of Advanced Materials and Processing, Vol. 3, No. 4, pp. 34-50, 2015..

25- “Modeling and Production of High Strength Al Strips by Equal Channel Multi Angular Pressing Method”, Journal of Advanced Materials and Processing, Vol. 3, No. 4, pp. 3-10, 2015..

26- “Friction coefficient execution by ring compression tests”, International Journal of Industrial and Manufacturing Engineering Vol. 2, No. 10, 2015..

27- “Equal channel angular pressing of Al1050 sheets: Experimental and finite element survey”, International Journal of Industrial and Manufacturing Engineering, Vol. 2, No. 10, 2015..

28- Optimizing turning operation of St37 steel using grey relational analysis, Journal of Computational and Applied Research in Mechanical Engineering (JCARME), Vol. 3, No. 2, 2014. .

Conference Papers/Abstracts/Posters (25)


1- Finite Element Simulation of Friction Stir Welded 7075 Aluminum Alloy Rolled Plate،3rd International Conference on Manufacturing Engineering ICME2011، Tehran، Iran 27-29 December 2011. .

2- Deep Drawing Investigation using Neural Network and Data Mining ،3rd International Conference on Manufacturing Engineering ICME2011، Tehran، Iran 27-29 December 2011. .

3- Friction Stir Welding of 7075 aluminum alloy rolled plate،3rd International Conference on Manufacturing Engineering ICME2011، Tehran، Iran 27-29 December 2011. .

4- Design Optimization of Composite Piezoelectric Actuator،(ICCESSE 2011) International Conference on Computer، Electrical، and Systems Sciences، and Engineering، June 24-26، 2011، Paris، France. .

5- Deep Drawing Investigation by Data Mining Methodology ،(ICCESSE 2011) International Conference on Computer، Electrical، and Systems Sciences، and Engineering، June 24-26، 2011، Paris، France. .

6- Frequency optimization of multi-layered piezoelectric micropump ،(ICCESSE 2011) International Conference on Computer، Electrical، and Systems Sciences، and Engineering، June 24-26، 2011، Paris، France. .

7- Process Simulation of Peugeot 206 fog lamps ،the Second International conference on Industrial Automation February 22 - 23، 2011 Sharif University of Technology، Iran. .

8- Sensitivity analysis for multi-layered piezoelectric micropump ،2nd International Conference on Composites: Characterization، Fabrication and Application (CCFA-2)، Dec. 27-30، 2010، Kish Island، Iran . .

9- Design and Simulation of a novel valve less Micropump ،8th International Conference on Advanced Semiconductor Devices and Microsystems (IEEE)، 24-27 October 2010، Smolenice، Slovakia. .

10- Investigation of existed time delay between exerted voltage and input/output liquid in piezoelectric micro pumps،8th International Conference on Advanced Semiconductor Devices and Microsystems (IEEE)، 24-27 October 2010، Smolenice، Slovakia. .

11- Wall Thickness Optimization of an Axisymmetric Workpiece using Neural Network model and Genetic Algorithm،First International conference on Industrial Automation October 27 - 28، 2009 Sharif University of Technology، Iran . .

12- An Integrated FEM and Data Mining Methodology in Sheet Metal Forming Production،the First International conference on Industrial Automation October 27 - 28، 2009 Sharif University of Technology، Iran. .

13- Optimization of Extruded Preform Dimensions for a T-Shape Hydroforming Part Based on Response Surface and Finite Element Method ،16th. Annual (International) Conference on Mechanical Engineering-ISME2008، May 14-16، 2008، Shahid Bahonar University of Kerman، Iran. .

14- Effect of Initial Tube Size on T-Shape Hydroformed Joint by Design of Experiment and Finite Element Method،16th. Annual (International) Conference on Mechanical Engineering-ISME2008، May 14-16، 2008، Shahid Bahonar University of Kerman، Iran. .

15- Prediction of Wall Thickness in Deep Drawing Process with Neural Network ،16th. Annual (International) Conference on Mechanical Engineering-ISME2008، May 14-16، 2008، Shahid Bahonar University of Kerman، Iran. .

16- Optimization in Deep Drawing Process ،16th. Annual (International) Conference on Mechanical Engineering-ISME2008، May 14-16، 2008، Shahid Bahonar University of Kerman، Iran. .

17- Numerical Optimization of a Two-Layered X-Shape Hydroforming Preform Design by Finite Element and Response Surface Methodology،7th Iranian Aerospace Society Conference Feb. 19-21/2008، Sharif University of Technology . .

18- An Investigation of Process Parameters on Quality of X-Shape Hydroformed Joint by Design of Experiment and Finite Element Method،International Conference on Mechanical and Manufacturing Engineering 2008 (ICME2008) 21st-23rd May 2008، Johor Bahru، Johor، Malaysia. .

19- Optimum Hydroforming Preform Shape Design by Shape Sensitivity Analysis،International Conference on Mechanical and Manufacturing Engineering 2008 (ICME2008) 21st-23rd May 2008، Johor Bahru، Johor، Malaysia . .

20- Optimum Hydroforming Preform Shape Design by Shape Sensitivity Analysis،International Conference on Mechanical and Manufacturing Engineering 2008 (ICME2008) 21st-23rd May 2008، Johor Bahru، Johor، Malaysia . .

21- Calculation of Leakage Flux، Hot Spot Point and Electromagnetic Forces in Distribution Transformers Considering Two Different type Winding،14th Annual (International) Conference of the Iranian Society of Mechanical Engineers، 15th -18th May 2007، Isfahan، Iran. .

22- Sensitivity Analysis of a Deep Drawing Process for an Axisymmetric Workpiece ،Tehran International Congress on Manufacturing Engineering (TICME2007)، 2007، Tehran، Iran. .

23- Influence of Process Parameters on the Deep Drawing of an Axisymmetric Workpiece ،Tehran International Congress on Manufacturing Engineering (TICME2007)، 2007، Tehran، Iran. .

24- Optimization of Multi-Pass Face-Milling using Genetic Algorithm and using Harmony Search Algorithm،Tehran International Congress on Manufacturing Engineering (TICME2007)، 2007، Tehran، Iran. .

25- Optimization of Warpage and Shrinkage in Injection–Molded Parts using Taguchi Method،Tehran International Congress on Manufacturing Engineering (TICME2007)، 2007، Tehran، Iran. .

Thesis Supervised (9)


1-Esmaeil Zahiri, Mehdi Kashtiban Mashhadi Keshtiban, Mojtaba Mokhtarian Asl, A Thesis Submitted in Partial Fulfillment of the Requirements for the Degree of M.Sc in Mechanical Engineering.

2-Reza Babaei Molke Talesh, Peyman Mashhadi Kashtiban, Abuzar Eshaghi Oskui, Investigation of Fracture in Produced Part by Single-Point Incremental Forming Method.

3-Morteza Ahmadpour, Peyman Mashhad Keshtiban, Investigation of static and dynamic agitator equipped with conical blades and the effect of blade design and manufacturing in improving its performance.

4-Jafar Chavoosh Bashi, Peyman Mashhadi Keshtiban, Abuzar Es’haghi Oskui, Investigating the effect of different types of lubrication on the fracture behavior of rolled sheet.

5-Saeid Hashemian, Peyman Mashhadi Keshtiban and Abuzar Eshaghi Oskui2, Investigation on the effect of forging process on the mixed-mode fracture behavior of the aluminum alloy .

6-Bahador Etminan Reziye, Yaghoub Pourasad and Peyman Mashhadi Keshtiban, Determining the Surface roughness of 3D printing produced parts by image processing method and optimizing the effective parameters of the process.

7-Amir Eftekhari and Peyman Mashhadi Keshtiban, Practical evaluation and finite element simulation of hot forging of Tiba vehicle brake input shaft and optimization of effective process parameters.

8-Amir Taher and Peyman Mashhadi Keshtiban, Investigation on superplastic behavior of 1050 aluminum strip processed by PC-ECAP.

9-Mohammad Shirmohammadi, Saeid Jafarzadeh Goushchi, Peyman Mashhadi Keshtiban, Optimization of 3D printing process parameters to minimize surface roughness with hybrid artificial neural network model and particle swarm algorithm.

Courses Taught (6)


1- Strength of Materials (B.Sc.).

2- Statics (B.Sc.).

3- Technical Drawing 2 (B.Sc.).

4- Technical Drawing 1 (B.Sc.).

5- Metals Forming analysis (M.Sc.).

6- Metals Forming (M.Sc.).

Professional Skills (1)


1- ABAQUS, MATLAB, Solidworks.
Addres : Urmia University of Technology, Band Road, Urmia ,Iran. Phone:+98(44)33728180-81, Fax:+98(44)33728183
©Copyright 2020-2021 - Faculty.UUT.AC.IR - All Right Reserverd