|
| 1- Application of Iranian nano-porous Ca-bentonite for recovery of waste lubricant oil by distillation and adsorption techniques. |
|
| 2- Preparation and characterization of nano porous bentonite for regeneration of semi-treated waste engine oil: Applied aspects for enhanced recovery. |
|
| 3- Shrinkage prediction during non-isothermal sintering in the presence liquid phase: New kinetic model, Part I. |
|
| 4- Effects of technical factors on dimensional stability of porcelain stoneware body during sintering process: Isothermal kinetic study, Part II. |
|
| 5- Effect of calcination temperature on colorant behavior of cobalt-aluminate nano-particles synthesized by combustion technique. |
|
| 6- Relationship between gel rheology and specific surface area of nano-sized CoAl2O4 powder manufactured by autoignition technique. |
|
| 7- Application of autoignition technique for synthesis of magnesium aluminate spinel in nano scale: Influence of starting solution pH on physico-chemical characteristics of particles. |
|
| 8- Rapid combustion synthesis of pure nano-crystalline gahnite: Effect of solution pH on powder characteristics. |
|
| 9- Reliability and fracture statistics of highly vitrified ceramics: Effect of technical factors on strength distribution. |
|
| 10- Phase formation of nano-sized metal aluminates using divalent cations (Mg, Co and Zn) by autoignition technique. |
|
| 11- Effect of glycine–starch mixing ratio on the structural characteristics of MgAl2O4 nano-particles synthesized by sol–gel combustion. |
|
| 12- Effect of fuel content on formation of zinc aluminate nano and micro-particles synthesised by high rate sol–gel autoignition of glycine-nitrates. |
|
| 13- Enhancement of Photocatalytic Activity of TiO2 Under Visible Light Irradiation by Graphene Oxide Nano Sheets. |
|
| 14- Optimal TiO2–Graphene Oxide Nanocomposite for Photocatalytic Activity under Sunlight Condition: Synthesis, Characterization, and Kinetics. |
|
| 15- Photocatalytic activity enhancement of anatase–graphene nanocomposite for methylene removal: Degradation and kinetics. |
|
| 16- Estimation of optimal physico-chemical characteristics of nano-sized inorganic blue pigment by combined artificial neural network and response surface methodology. |
|
| 17- A novel method for the clean synthesis of nano-sized cobalt based blue pigments. |
|
| 18- Magnetization of TiO2/reduced graphene oxide nano photocatalyst. |
|
| 19- A novel design for clean and economical manufacturing new nano-porous zeolite based adsorbent by alkali cement kiln dust for lead uptake from wastewater. |
|
| 20- A Review to the Effects of Cations Replacement on the Properties of Combined Spinels Based on Cobalt, Zinc and Magnesium. |
|
| 21- Technical aspect for oxidation of magnesium and aluminum nitrates to manufacture nano- and micro-sized MgAl2O4 spinel by combustion method. |
|
| 22- Optimizing adsorption of blue pigment from wastewater by nano-porous modified Na-bentonite using spectrophotometry based on response surface method. |
|
| 23- Facile and rapid auto-combustion synthesis of nano-porous γ-Al2O3 by application of hexamethylenetetramine in fuel composition. |
|
| 24- Management of adsorbent content in waste motor oil regeneration by spectrophotometrical study and effective acidification in production of nano-porous clay. |
|
| 25- Fabrication of poorly crystalline hydroxyapatite nano-particles by rapid auto-ignition route as efficient adsorbent for removal of disperse blue dye. |
|
| 26- Dye Degradation by Anatase Coated on Meta-kaolin Support. |
|
| 27- Regeneration of wastewater contaminated by cationic dye by nanoporous activated carbon produced from agriculture waste shells. |
|
| 28- Clean and new strategy for catalytic conversion of agriculture waste shells to activated carbon via microwave-assisted impregnation: Applied and eco-friendly aspect for decoloration of industrial corn syrup and process identifications. |
|
| 29- Microwave-assisted for clean and rapid fabrication of highly efficient magnetically separable activated carbon from agriculture shells for low grade industrial corn syrup decoloration: A novel strategy for impregnation of ternary catalytic composite. |
|
| 30- Spectrophotometrical analysis for fabrication of pH-independent nano-sized γ-alumina by dealumination of kaolin and precipitation in the presence of surfactant composites. |
|
| 31- Efficient removal of contaminants from waste lubricant oil by nano-porous bentonite produced via microwave-assisted rapid activation: process identifications and optimization. |
|
| 32- Efficient photocatalytic methylene blue degradation by Fe3O4@TiO2 core/shell linked to graphene by aminopropyltrimethoxysilane. |
|
| 33- Application of solid waste of ductile cast iron industry for treatment of wastewater contaminated by reactive blue dye via appropriate nano-porous magnesium oxide. |
|
| 34- Nano-porous hydrosodalite fabrication via hydrothermal modification of processed kaolin by boehmite: Aluminum source effect on physico-chemical characteristics of product. |
|
| 35- Extraction of nano-porous silica from hydrosodalite produced via modification of low-grade kaolin for removal of methylene blue from wastewater. |
|
| 36- Evaluation of packed bed photoreactor performance in photocatalytic treatment of wastewater by solar irradiation: A novel strategy for immobilization of nano-sized anatase-graphene oxide composite on extruded rod like metakaolin support. |
|
| 37- Effects of Iron and Graphene Oxide on the Photocatalytic activity of Titanium Dioxide for Methylene Blue Degradation. |
|
| 38- Synthesis of Magnesium Aluminate-Grapheme Oxide Composite for Dye Removal. |
|
| 39- Decoration of anatase-graphene nanocomposites on extruded nano-porous mullite based support for dye degradation under solar irradiation in a dynamic system: Photocatalytic activity and mechanical characterization. |
|
| 40- Fabrication of magnetic activated carbon by carbothermal functionalization of agriculture waste via microwave-assisted technique for cationic dye adsorption. |
|
| 41- Photoactivity of magnesium aluminate under solar irradiation for treatment of wastewater contaminated by methylene blue: Effect of self-combustion factors on spinel characteristics. |
|
| 42- Characterization of phase transformation from low grade kaolin to zeolite LTA in fusion technique: Focus on quartz melting and crystallization in presence of NaAlO2. |
|
| 43- Solar treatment of sewage discharged from industrial estate for reduction of chemical oxygen demand over Degussa P-25 titania. |
|
| 44- Production of mesoporous and thermally stable silica powder from low grade kaolin based on eco-friendly template free route via acidification of appropriate zeolite compound for removal of cationic dye from wastewater. |
|
| 45- Microwave‐assisted pyrolysis of organometallic gel prepared through ternary combination of surfactants for fabrication of nano‐porous gamma alumina: adsorptive properties, characterization. |
|
| 46- Microwave‐assisted pyrolysis of organometallic gel prepared through ternary combination of surfactants for fabrication of nano‐porous gamma alumina: adsorptive properties, characterization. |
|
| 47- Removal of chemical oxygen demand from industrial estate sewage over hybridized anatase-graphene oxide-carbon nanotubes nanocomposite under solar irradiation. |
|
| 48- Sol-gel and hydrothermal technical ability in synthesis of magnetic anatase-graphene oxide nanocomposite with excellent photoactivity. |
|
| 49- Couple of graphene oxide and functionalized carbon nanotubes for dye degradation enhancement of anatase under visible light and solar irradiation. |
|
| 50- Potential of fusion technique in production of mesoporous zeolite A powder from poor kaolin through modification by boehmite: Effect of clay mineralogy on particle morphology. |
|
| 51- Super effective recovery of industrial wastewater contaminated by multi-disperse dyes through hydroxyapatite produced from eggshell. |
|
| 52- Management of Solid Waste Deposited in Landfill of Used Motor Oil Recovery Units Via Production of Zeolite A With Proper Cation Exchange Capacity by Fusion Technique. |
|
| 53- Role of amine-based fuel combination in conventional and microwave-assisted smoldering combustion for production of mesoporous hydroxyapatite with super adsorptive characteristics for separation of disperse dye. |
|
| 54- Pilot plant study for management of toxic solid waste collected in landfill of spent lubricant oil refinery by conversion into zeolite packed bed via continuous extrusion and fusion techniques. |
|
| 55- Industrial performance, reusability and mechanical reliability of mesoporous gamma alumina packed bed fabricated through boehmite extrusion for removal of reactive dyes from textile wastewaters. |
|
| 56- Role of aluminum resource in conversion of bentonite into low silica-based zeolites via fusion technology. |
|
| 57- Management of solid waste after used motor oil recovery via production of zeolite A. |
|
| 58- Sono-chemical extraction of silica from rice husk for uptake of chromium species from tannery wastewater: Effect of aging time on porous structure. |
|
| 59- Treatment of tannery wastewater by silica nanoparticles produced from rice husk ash via a green route. |
|
| 60- Identification of phase transformation during conversion of Ca-bentonite into a low silica-based zeolite structure through fusion and hydrothermal processes. |
|
| 61- Preparation of thermally recyclable γ-alumina nanoparticles from boehmite for adsorption of anionic dyes: Spectrophotometric study, structural characterization and industrial experience. |
|
| 62- One-step fabrication of mesoporous maghemite nanoparticles by autoignition: Effect of fuel ratio on crystalline structure, magnetic characteristics and textural properties, https://www.sciencedirect.com/science/article/abs/pii/S0009261423002245. |
|
| 63- A novel technique for fabrication of rod-like shape zeolite LTA and hydroxysodalite by extrusion of bentonite powder: Effects of technical factors on structural characteristics, https://www.sciencedirect.com/science/article/abs/pii/S0921883123001486. |