• پیمان مشهدی کشتیبان

  • دانشیار
  • گروه مهندسی ساخت و تولید
Email:   
WebSite: https://faculty.uut.ac.ir/peyman_mashhadi_keshtiban

بیوگرافی کوتاه

          

Peyman Mashhadi Keshtiban received BSc and MSc in manufacturing engineering from Amir Kabir University of Technology in 2005 and 2007, respectively, and during this period he carried out several industrial projects in the field of manufacturing engineering, especially mold making. He also received Ph.D. in manufacturing engineering from University of Tabriz in 2016. He is currently an Assistant Professor of Manufacturing engineering at the Urmia University of Technology, Iran. His current research interest includes Manufacturing Methods, Metals Forming and Materials Science.
         
    

رزومه آموزشی و پژوهشی

[English CV]

تحصیلات/دوره های دانشگاهی (3)

مقالات ژورنال (31)

مقالات و خلاصه مقالات ارائه شده در همايش ها (24)

پروژه های تحقیقاتی (2)

پایان نامه ها (9)

دروس تدریس شده (6)

مهارت ها (1)
   
  • نام و نام خانوادگی
  • پیمان مشهدی کشتیبان
  • مدرک تحصیلی
  • دکتری
  • درجه علمی
  • دانشیار
  • بخش مربوطه
  • گروه مهندسی ساخت و تولید
 
        بیوگرافی کوتاه

Peyman Mashhadi Keshtiban received BSc and MSc in manufacturing engineering from Amir Kabir University of Technology in 2005 and 2007, respectively, and during this period he carried out several industrial projects in the field of manufacturing engineering, especially mold making. He also received Ph.D. in manufacturing engineering from University of Tabriz in 2016. He is currently an Assistant Professor of Manufacturing engineering at the Urmia University of Technology, Iran. His current research interest includes Manufacturing Methods, Metals Forming and Materials Science.

 
 
         
     رزومه آموزشی و پژوهشی

تحصیلات/دوره های دانشگاهی (3)


1- دکتری تخصصی، مهندسی ساخت و تولید،دانشگاه تبریز، ۱۳۹۴.

2- کارشناسی ارشد مهندسی ساخت و تولید،دانشگاه صنعتی امیرکبیر، ۱۳۸۶.

3- کارشناسی مهندسی ساخت و تولید،دانشگاه صنعتی امیرکبیر، ۱۳۸۴.

مقالات ژورنال (31)


1- Investigation of mode-I fracture behavior by essential work of fracture during the single-point incremental forming process,Engineering Failure Analysis.

2- Constitutive analysis and hot deformation behavior of homogenized Al-3Mg alloy, JOM.

3- Fracture behavior of the forged aluminum 7075-T6 alloy under mixed-mode loading conditions, Engineering Failure Analysis .

4- Enhancing risk assessment of manufacturing production process integrating failure modes and sequential fuzzy cognitive map, Quality Engineering.

5- “Numerical Simulation of Hot Forging Process of KIA Car Brake’s Output Shaft”, International Journal of Advanced Design & Manufacturing Technology, accepted. .

6- “Optimization of 3D printing process parameters to minimize surface roughness with hybrid artificial neural network model and particle swarm algorithm”, Progress in Additive Manufacturing, 2021. .

7- “Investigation on the anisotropy behavior of copper strips processed by a combination of FSP and ECAP”, Part L: Journal of Materials: Design and Applications, 2021. .

8- “Practical Study and Finite Element Simulation of Production Process of the Bush of Gearbox of Mercedes-Benz 10-Wheel Truck by Closed Die Forging”, Journal of Computational Applied Mechanics, 2021. .

9- “An Investigation of the Effective Factors in the Shape Rolling Process of a Compressor Blade”, Iranian Journal of Materials Forming, 2020. .

10- “Microstructural Evolutions During the ECMAP Process Using the Die with Optimum Geometrical Parameters”, Metallography, Microstructure, and Analysis, 2020. .

11- “An investigation of tensile strength of Ti6Al4V titanium screw inside femur bone using finite element and experimental tests”, Journal of Computational Applied Mechanics, 2020. .

12- “Optimal Process Parameters in ECMAP of Al-3% Mg Alloy Strips”, International Journal of Advanced Design & Manufacturing Technology, 2020. .

13- “Investigation of the effective parameters in severe plastic deformation of strip type samples”, Tabriz Mechanical Engineering, 2019. .

14- “Performance evaluation of vegetable base oils relative to mineral base oils in the lubrication of cold forming processes of 2024 alumi”, Part J: Journal of Engineering Tribology, 2018. .

15- “Experimental investigation of multi-pass ECMAP process”, Transactions of the Indian Institute of Metals, 2018. .

16- “Optimal process parameters in ECMAP of Al−3% Mg alloy strips”, Journal of Advanced Design and Manufacturing Technology, 2018. .

17- “Recycling of Magnesium Machining Chips via Shear Consolidation Processing”, Journal of Advanced Design and Manufacturing Technology, 2018. .

18- “Finite Element Simulation and practical investigation to reduce friction coefficient by vegetable oil lubricants”, Iranian Journal of Mechanical Engineering, 2018. .

19- “Investigation of the effective parameters in severe plastic deformation of strip type samples”, Journal of Faculty of Engineering (University of Tabriz), 2018. .

20- “Lubrication efficiency of vegetable oil nano-lubricants and solid powder lubricants”, Part L: J Materials: Design and Applications, 2018. .

21- “Die and process parameters effects on ECAP process of sheet type samples”, Metallography, Microstructure and Analysis, 2018. .

22- “Routes Investigation in Equal Channel Multi-angular Pressing Process of UFG Al−3% Mg Alloy Strips”, Transactions of the Indian Institute of Metals, 2018. .

23- “Investigation of CuO and AL2O3 Nano-lubricants effect on the surface roughness in the forging process of aluminum alloy”, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2017. .

24- “Effect of the Nano Particle Solution on the Coulomb Friction Behavior of Aluminum Alloy Forging Process using the Taguchi Method”, Iranian Journal of Surface Science and Engineering, 2017. .

25- “ Friction study in Equal Channel Multi Angular Pressing: Load Curve and Ring Compression tests”, Transactions of the Indian Institute of Metals, Vol. 69, No. 9, pp. 1793–1800, 2016. .

26- “Optimization of geometrical parameters of equal channel multi angular pressing process”, Modares Mechanical Engineering, Vol. 16, No. 2, pp. 275-282, 2016. .

27- “Optimization of ECMAP Parameters in the Production of Ultra-fine Grained Al1050 Strips Using Grey Relational Analysis”, Journal of Advanced Materials and Processing, Vol. 3, No. 4, pp. 34-50, 2015. .

28- “Modeling and Production of High Strength Al Strips by Equal Channel Multi Angular Pressing Method”, Journal of Advanced Materials and Processing, Vol. 3, No. 4, pp. 3-10, 2015. .

29- “Friction coefficient execution by ring compression tests”, International Journal of Industrial and Manufacturing Engineering Vol. 2, No. 10, 2015. .

30- “Equal channel angular pressing of Al1050 sheets: Experimental and finite element survey”, International Journal of Industrial and Manufacturing Engineering, Vol. 2, No. 10, 2015. .

31- Optimizing turning operation of St37 steel using grey relational analysis, Journal of Computational and Applied Research in Mechanical Engineering (JCARME), Vol. 3, No. 2, 2014. .

مقالات و خلاصه مقالات ارائه شده در همايش ها (24)


1- Finite Element Simulation of Friction Stir Welded 7075 Aluminum Alloy Rolled Plate،3rd International Conference on Manufacturing Engineering ICME2011، Tehran، Iran 27-29 December 2011.

2- Deep Drawing Investigation using Neural Network and Data Mining ،3rd International Conference on Manufacturing Engineering ICME2011، Tehran، Iran 27-29 December 201.

3- Friction Stir Welding of 7075 aluminum alloy rolled plate،3rd International Conference on Manufacturing Engineering ICME2011، Tehran، Iran 27-29 December 2011.

4- Design Optimization of Composite Piezoelectric Actuator،(ICCESSE 2011) International Conference on Computer، Electrical، and Systems Sciences، and Engineering، June 24-26، 2011، Paris، France.

5- Deep Drawing Investigation by Data Mining Methodology ،(ICCESSE 2011) International Conference on Computer، Electrical، and Systems Sciences، and Engineering، June 24-26، 2011، Paris، France.

6- Frequency optimization of multi-layered piezoelectric micropump ،(ICCESSE 2011) International Conference on Computer، Electrical، and Systems Sciences، and Engineering، June 24-26، 2011، Paris، France.

7- Process Simulation of Peugeot 206 fog lamps ،the Second International conference on Industrial Automation February 22 - 23، 2011 Sharif University of Technology، Iran.

8- Sensitivity analysis for multi-layered piezoelectric micropump ،2nd International Conference on Composites: Characterization، Fabrication and Application (CCFA-2)، Dec. 27-30، 2010، Kish Island، Iran .

9- Design and Simulation of a novel valve less Micropump ،8th International Conference on Advanced Semiconductor Devices and Microsystems (IEEE)، 24-27 October 2010، Smolenice، Slovakia.

10- Investigation of existed time delay between exerted voltage and input/output liquid in piezoelectric micro pumps،8th International Conference on Advanced Semiconductor Devices and Microsystems (IEEE)، 24-27 October 2010، Smolenice، Slovakia.

11- Wall Thickness Optimization of an Axisymmetric Workpiece using Neural Network model and Genetic Algorithm،First International conference on Industrial Automation October 27 - 28، 2009 Sharif University of Technology، Iran .

12- An Integrated FEM and Data Mining Methodology in Sheet Metal Forming Production،the First International conference on Industrial Automation October 27 - 28، 2009 Sharif University of Technology، Iran.

13- Optimization of Extruded Preform Dimensions for a T-Shape Hydroforming Part Based on Response Surface and Finite Element Method ،16th. Annual (International) Conference on Mechanical Engineering-ISME2008، May 14-16، 2008، Shahid Bahonar University of Kerman، Iran.

14- Effect of Initial Tube Size on T-Shape Hydroformed Joint by Design of Experiment and Finite Element Method،16th. Annual (International) Conference on Mechanical Engineering-ISME2008، May 14-16، 2008، Shahid Bahonar University of Kerman، Iran.

15- Prediction of Wall Thickness in Deep Drawing Process with Neural Network ،16th. Annual (International) Conference on Mechanical Engineering-ISME2008، May 14-16، 2008، Shahid Bahonar University of Kerman، Iran.

16- Optimization in Deep Drawing Process ،16th. Annual (International) Conference on Mechanical Engineering-ISME2008، May 14-16، 2008، Shahid Bahonar University of Kerman، Iran.

17- Numerical Optimization of a Two-Layered X-Shape Hydroforming Preform Design by Finite Element and Response Surface Methodology،7th Iranian Aerospace Society Conference Feb. 19-21/2008، Sharif University of Technology .

18- An Investigation of Process Parameters on Quality of X-Shape Hydroformed Joint by Design of Experiment and Finite Element Method،International Conference on Mechanical and Manufacturing Engineering 2008 (ICME2008) 21st-23rd May 2008، Johor Bahru، Johor، Malaysia.

19- Optimum Hydroforming Preform Shape Design by Shape Sensitivity Analysis،International Conference on Mechanical and Manufacturing Engineering 2008 (ICME2008) 21st-23rd May 2008، Johor Bahru، Johor، Malaysia .

20- Calculation of Leakage Flux، Hot Spot Point and Electromagnetic Forces in Distribution Transformers Considering Two Different type Winding،14th Annual (International) Conference of the Iranian Society of Mechanical Engineers، 15th -18th May 2007، Isfahan، Iran.

21- Sensitivity Analysis of a Deep Drawing Process for an Axisymmetric Workpiece ،Tehran International Congress on Manufacturing Engineering (TICME2007)، 2007، Tehran، Iran.

22- Influence of Process Parameters on the Deep Drawing of an Axisymmetric Workpiece ،Tehran International Congress on Manufacturing Engineering (TICME2007)، 2007، Tehran، Iran.

23- Optimization of Multi-Pass Face-Milling using Genetic Algorithm and using Harmony Search Algorithm،Tehran International Congress on Manufacturing Engineering (TICME2007)، 2007، Tehran، Iran.

24- Optimization of Warpage and Shrinkage in Injection–Molded Parts using Taguchi Method،Tehran International Congress on Manufacturing Engineering (TICME2007)، 2007، Tehran، Iran.

پروژه های تحقیقاتی (2)


1-پیمان مشهدی کشتیبان، تهیه و تدوین و آماده سازی مدارک و مستندات تعداد ۲۰ مورد از واحدهای تولیدی و فناوری برای ثبت در سامانه دانش بنیان،شرکت شهرکهای صنعتی.

2-پیمان مشهدی کشتیبان، بروز رسانی اطلاعات واحدهای فناور مستعد دانش بنیان و کمک به دانش بنیان شدن واحدهای مستعد،شرکت شهرکهای صنعتی.

پایان نامه ها (9)


1-اسماعیل ظهیری، پیمان مشهدی کشتیبان، مجتبی مختاریان اصل، بررسی شکل پذیری تدریجی ورق آلومینیوم T6-2024 و بهینه سازی پارامترهای موثر.

2-رضا بابائی ملک طالش، پیمان مشهدی کشتیبان، ابوذر اسحقی اسکویی، بررسی شکست در قطعات تولیدی به روش شکل‌دهی تدریجی تک نقطه‌ای.

3-مرتضي احمدپور حورمغان، پیمان مشهدی کشتیبان، ساخت همزن مخروطی دینامیکی و بهبود عملکرد آن با جایگذاری اجزاء استاتیکی درونی .

4-جعفر چاوش باشی، پیمان مشهدی کشتیبان، ابوذر اسحقی اسکویی، بررسی اثر انواع روانکاری در رفتار شکست ورق نورد، ۱۴۰۱.

5-سعید هاشمیان،پیمان مشهدي کشتیبان و ابوذر اسحقی اسکوئی، بررسی رفتار شکست مود مرکب قطعات فورج شده آلیاژ آلومینیومی T6-7075،دانشگاه صنعتی ارومیه، ۱۴۰۰.

6-بهادر اطمینان رضائیه، یعقوب پوراسد و پیمان مشهدی کشتیبان، تعیین زبری سطح قطعات تولید شده توسط چاپ سه بعدی با روش پردازش تصویر و بهینه سازی پارامترهای موثر فرآیند،دانشگاه صنعتی ارومیه، ۱۴۰۰.

7-امیر افتخاری و پیمان مشهدی کشتیبان، بررسي عملي و شبیه سازی المان محدود فرآیند آهنگری گرم شفت ورودی ترمز خودرو تیبا و بهینه سازی پارامترهای موثر در فرآیند،دانشگاه صنعتی ارومیه، ۱۴۰۰.

8-امیر طاهر و پیمان مشهدی کشتیبان، بررسي رفتار سوپرپلاستیک نوار آلومینیوم 1050 فرآور یشده ب هروش PC-ECAP،دانشگاه صنعتی ارومیه، ۱۴۰۰.

9-محمد شیرمحمدی، سعید جعفرزاده و پیمان مشهدی کشتیبان، بهینه سازی پارامترهای ورودی چاپگر سه بعدی با هدف بهحداقل رساندن زبری سطح با مدل ترکیبي شبكه عصبي مصنوعي و الگوریتم ازدحام ذرات،دانشگاه صنعتی ارومیه، ۱۳۹۷.

دروس تدریس شده (6)


1- مقاومت مصالح، کارشناسی.

2- استاتیک، کارشناسی.

3- نقشه کشي صنعتي دو، کارشناسی.

4- نقشه کشي صنعتي یک، کارشناسی.

5- آنالیز شکل دادن فلزات، کارشناسی ارشد.

6- شکل دادن فلزات، کارشناسی ارشد.

مهارت ها (1)


1- ABAQUS, MATLAB, Solidworks.
آدرس: ایران-ارومیه- بعد از گلشهر،ابتدای جاده بند، صندوق پستی 165 کدپستی 5756151818
شماره تلفنخانه : 82-33728081-044 شماره فاکس دبیرخانه: 31980255-044 پست الکترونیکی : info@uut.ac.ir
©Copyright 2020-2021 - Faculty.UUT.AC.IR - All Right Reserverd